[geoip_detect2 property="country"]
Consumable items

A wide range of components for various formwork systems.

Consumable items

The “sprocket” armature забезпечує захисний шар арматури. It is a strong universal clamping device that can be fixed on the armature, both vertically and horizontally.

Sprocket retainers fasteners create lateral protection in walls, columns, foundations. Sprockets on the armature are made of flexible plastic in the form of a wheel with a clip.

We have sprocket retainers for vertical armature bar to 18 mm and 20 mm.

Prop retainer is used to form a protective layer of horizontal reinforcement of 20 mm on a solid base, which allows placing the armature at the required distance from the base and walls of the formwork.

The special design of the retainer distributes the load over the entire area of the product, which in turn ensures greater reliability under the pressure of the reinforcement cage.

The herringbone plug is a universal retainer that serves to close unused holes in the formwork.

It is used to close unused holes for anchor rods in the formwork, as well as holes in the walls after dismantling the formwork.

Most suitable for formwork systems are TM Variant and TM DOKA.

The cone is a universal retainer for the maintenance of vertical formwork systems, suitable for any standard formwork tube with a diameter of 22/25 mm.

It ensures a tight fit of the protective tube with the forming surface and prevents concrete from entering the tube of the restrictor.

It speeds up the formwork installation process by leveling uneven sections of the tube.

The PVC pipe protects the stretching screws of the vertical formwork from direct contact with concrete, which allows you to remove the elements without damage for their further use.

It is used together with cone retainers, which help to fix the pipe correctly, excluding the ingress of concrete matrix between the pipe and formwork plywood.

The pipe has sufficient rigidity to serve as a convenient wall thickness limiter when installing the formwork.

The anchor rod is intended for reliable fixation of the wall formwork.

Used together with nuts, protective plastic pipe and cones. It is the anchor rod and swivel nuts that directly perceive the pressure of the concrete mixture, so the choice of high-quality components for formwork is of great importance for safe work.

Our assortment includes anchor rods from trusted manufacturers with a length of 3.0 m.

«Advance» oil is an indispensable component in monolithic construction when using formwork systems, production of concrete products and structures.

It is suitable for all types of formwork – the oil is equally effective and safe for laminated plywood, wooden formwork, metal and plastic formwork.

We have oil in convenient canisters of various capacities – 10, 20 and 200 liters.

Consumable items